Red Polyform G4 Boat Fenders Bumper 6.5'' x 22'' Set of 2 Premium Made in USA

(No reviews yet) Write a Review
8.00 LBS
Calculated at Checkout

Red Polyform G4 Boat Fenders 22'' x 6.5'' set of 2

  • Size - 22'' x 6.5''
  • Even wall thickness for maximum strength
  • Premium Marine Vinyl
  • Soft Design
  • Designed for use by trailered boats and permanent protected moorings
  • Non- Abrasive
  • Can be  Tied to Cleats or Rails
  • Reinforced Rope Holes on both ends
  • Can be hung Vertical or Horizontal
  • Pre- Inflated and Ready to Use
  • Unique Polyform valve for years of service
  • 1 Inflation adapter included per pair of fenders
  • Ribbed on all sides for Strength and Durability
  • UV Resistant
  • Made in USA

 Frequently Asked Questions: Boat Fenders

 What Size Fender Do I Need? Many factors should be considered when determining what size fender to use. Following is the recommended size for fenders by Boat Length:

  •  4’’ x 16’’ Boats up to 10 foot
  •  5’’ x 20’’ Boats up to 20 foot
  •  6’’ x 22’’ Boats up to 25 foot
  •  8’’ x 27’’ Boats up to 30 foot

 If you moor frequently in High winds, Rough water, and Unprotected Moorings, or if you have a large High Profile boat you may want to consider using one size larger.

 How are these fenders constructed? Most of the fenders we carry are single wall construction. If a fender is constructed differently, it will be stated in the description.

 Do these fenders come inflated? Yes, all of the fenders we sell are shipped inflated. You may wish to adjust the final pressure when you receive them

 Can the Pressure be Adjusted? Yes, all of the fenders we sell have inflation ports on them. Please see each item description for specific instructions on inflation

 Are these Fenders Guaranteed? When used under recommended conditions the Polyform Fenders are covered by the manufacturer under warranty to be free from defects for the life of the product. All Boater Sports Fenders are covered by a 30 day satisfaction guarantee through us.

 Are these Fenders Made In America? All Polyform Fenders are Made in the USA. All Boater Sports Fenders are imported.

 Will the Fenders Scuff my Boat? No, when used properly on a boat with Gel Coat in good condition the fenders will not leave any marks

 Why is Shipping so Expensive? We only charge actual UPS shipping cost and do not profit from shipping. Unfortunately, due to the size of some Fenders shipping can be expensive. We always combine shipping on items when possible.

 Important Note: These answers should be used as general guidelines only and should not be substituted for Professional Advice. We have no way of foreseeing every condition these Fenders may be used in. If you are not confident in which Fenders you require, we recommend contacting your boat’s manufacturer or local authorities to get information on any specific conditions unique to your application. All item images and item descriptions on this listing are property of Underwoods Auto & Marine LLC and are not to be used, copied, or otherwise reproduced without written permission.